Industrial Grade Wireless High Temperature Sensor with 9 RTD Sensors

Leap Sensors are specially designed to easily adapt to your specific needs. If this isn’t exactly what you need, please contact us.

Wireless High Temperature Sensor with 9 RTDs Specifications

• Highly configurable for your specific application:
  • Can be used with any 3-wire RTD, including pointed insertion probes.
  • Connecting cable can be any length.
• Electronics and battery are rated to 120ºC (248ºF), but housing can shield high temperatures for a limited time to allow the entire sensor to pass through ovens up to 250ºC (480ºF) in these conditions:

Case 1

• • Zone 1 at 150 °C  (302ºF): 45 seconds
  • Zone 2 at 200 °C (392ºF): 45 seconds
  • Zone 3 at 250 °C (482ºF): 90 seconds
  • Zone 4 at 200 °C (392ºF): 45 seconds
  • Zone 5 at 150 °C (302ºF): 45 seconds
  • Zone 6 at 15 °C (59ºF)

Case 2

• • Zone 1 at 150 °C (302ºF): 600 seconds
  • Zone 2 at 170 °C (338ºF): 600 seconds
  • Zone 3 at 20 °C (68ºF)

Case 3

• • Zone 1 at 100 °C (212ºF): 100 seconds
  • Zone 2 at 200 °C (392ºF): 300 seconds
  • Zone 3 at 100 °C (212ºF): 50 seconds

• RTD temperature sensors: Thin film, 2.3×2.1×0.9mm, -50C to 500C, Class A RTD, 1000 ohm, 3 wire.
• Temperature sensors may be adhered to surfaces with kapton tape or high temperature epoxy.
• 24-bit resolution.
• Enclosure size: 3 x 3.1 x 0.9 inches (7.62 x 7.87 x 2.29 cm)
• Weight: 290 grams  (10.23 oz.)
• Due to the small batteries, this Leap transceiver node transmits approximately 50 feet (15 meters.)

The wireless high-temperature 9-RTD sensor is ideal for monitoring:

• Circuit board reflow ovens
• Wafer reflow ovens
• Wafer heating processes
• Food processing ovens